The LitePoint IQ2010™ is a comprehensive, one-box test solution for all your connectivity testing needs:
WiFi, 802.11a/b/g/n and 802.11p
Bluetooth, Classic (1.x, 2.x, 3.0) and Low Energy (4.0)
The IQ2010 dramatically streamlines the testing process for complex modules and devices:Single Insertion, Multi-Radio, Test Technology:
- > 20% time savings compared with multi-insertion methods due to reduced handling and the elimination of multiple device boot times
- Up to 50% test time reduction in contrast to sequential approaches
Simplicity: Six Standards – One Tester
The IQ2010 provides the comprehensive, wireless testing support you need to test WLAN, Bluetooth, GPS, MIMO, WiMAX, FM, and NFC.
Savings: Achieving the Highest Throughput
IQ2010 technology reduces device analysis to a fraction of the time required by traditional methods. Thereby maximizing your manufacturing throughput.
Single Insertion Testing enables all connectivity standards to be tested in one insertion eliminating multiple device boot times.
Concurrent Testing enables testing of FM, GPS, and WLAN/BT at the same time resulting in up to a 100% improvement in test station throughput.
Sequence-Based Testing methodologies minimize device communication time
TX test up to 6X faster with multiple data rates in one capture
RX test up to 4X faster with fast PER (Packet Error Rate) methodology
The LitePoint IQxstream Companion
When combined with IQxstream, IQ2010 is an even more powerful tool by delivering a total cellular/connectivity, multi-DUT test station for today’s complex smart phones, tablets, and more.
IQxstream multi-device capability dramatically reduces the total cellular test time
IQ2010 provides all key connectivity radio tests - in parallel
Shortest Time to Market
In conjunction with IQ2010, IQfact/IQfactPlus can take months off your development schedule and allow you to ramp your production more quickly than ever.
IQfact/IQfactPlus solutions deliver the fastest production deployment
The IQfact/IQfactPlus “certified” chip-set-enabled device test programs control both the device and tester
IQ2010 is software license-configured to meet your specific needs:
IQ2010 base model
- Zigbee (802.15.4)
Wireless Devices with Multiple Technology Standards
Modules/System in Package (SiP) Devices
Consumer Electronics (CE) Wireless-Enabled Devices
Smart Appliances and Devices
FM: 76 to 108 MHz
GPS: 1.57542 GHz (L1)
WLAN: 2.4 to 2.5 GHz, 4.9 to 6.0 GHz
WiMAX: 2.3 to 2.7 GHz, 3.3 to 3.8 GHz, 4.9 to 6.0 GHz
Input Power Range:
FM: +10 dBm to -40 dBm
WLAN: +30 dBm to -148 dBm/Hz
WiMAX: +30 dBm to -148 dBm/Hz
Output Power Range:
FM: -40 dBm to -110 dBm
GPS: -60 dBm to -145 dBm
WLAN: +10 dBm to -95 dBm
WiMAX: +10 dBm to -95 dBm